Bench height

From PLANTFACTS.OSU.EDU
Revision as of 16:40, 6 July 2017 by Elaine (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In the maintenance shop, a setting is done measuring height of cut from a hard, level surface to the cutting edge. This is called "bench set" height of cut.

benchsetting.jpg

Although the mower is not set on a hard level surface, the bench setting is being done with a measuring gauge using the front roller and bedknife as a reference.
Source: Ohio State University Turfgrass Program